Mobile Go
Cel-Fi GO mobile for Telstra 3g & 4g
Cel-Fi GO Mobile Repeater has been tested, authorised and approved by Telstra for use on the Telstra Mobile Network.
Nextivity's Cel-Fi GO is an intelligent in vehicle coverage solution for Telstra's Next G® and 4GX networks operating on 3G 850Mhz and 4G 700/1800 bands. It is designed to dramatically boost voice quality and increase data speeds for moving vehicle applications.
The Cel-fi GO differs greatly from the standard vehicle repeater due to its ability to not interfere with the mobile network or other users. Often referred to as a Smart Repeater, Cel-Fi GO has the ability to provide maximum coverage and be network friendly.
It does this in several ways by
•continuously monitoring power levels of the cell tower it is connected to and constantly adjusting the Cel-Fi's output power to suit.
•only amplifying and disbursing a particular carrier’s mobile signal, operating within a set frequency band.
•not interfering with the carrier’s network or other users on the network.
•having a unique installation process to eliminate feedback into the mobile network.
Cel-Fi GO is covered by a 24 month warranty.
Important Note: Cel-Fi GO will boost a single band at a time (either 3G 850 or 4G 700 or 4G 1800). It is highly recommended to leave the GO in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones.
Cel-Fi GO for Telstra
MOBILE MODEL
Made for vehicles and transport applications
70dB of system gain
Will only start boosting once the mobile signal drops below -80dBm (3G) or -96dBm (4G)
Includes external and internal antennas
Locked to Telstra's Mobile Network
Carrier approved
Band Selection Button
Bluetooth WAVE App for iPhone, Android & Computers
Download Brochure
